FACOM 2000.BBM160A – SET CM.160A WITH WORKBENCH 2000.BB1M3 AND CABINET 2210 (528 PCS.)

113A (2 pcs.) – Adjustable wrenches 6″ and 10″
115A.100 (1 pcs.) – Pin wrench
134A.18 (1 pcs.) – Pipe wrench
138A.18 (1 pcs.) – Strap wrench 4″
167A (3 pcs.) – Outside-circlip® pliers 13 – 18 – 23
169A (3 pcs.) – Inside-circlip® pliers 13 – 18 – 23
181A.25CPE (1 pcs.) – Lockable multigrip pliers
181A.30G (1 pcs.) – Lockable multigrip pliers
185.20CPE (1 pcs.) – Sheathed straight half-round nose pliers
187.18CPE (1 pcs.) – Sheathed combination pliers
188.16CPE (1 pcs.) – Sheathed flat-nose pliers
189.17CPE (1 pcs.) – Sheathed round-nose pliers
191A.18EL (1 pcs.) – Low-effort cutters
192.16CPE (1 pcs.) – Piano wire diagonal cutters
195.20CPE (1 pcs.) – Sheathed angled half-round nose pliers
2000.BB1M3 (1 pcs.) – Heavy-duty workbench 2 m – 12 drawers
200H (2 pcs.) – Riveting hammers 24 and 32 mm
208A.32CBA (1 pcs.) – Interchangeable-tip mallets
212A.40 (1 pcs.) – Dead-blow hammer
221.227J2 (41 pcs.) – Tap and die set (in a case)
2210 (1 pcs.) – Shutter cabinet 2 m long
222A.TJ19 (19 pcs.) – Box set of drill-bits 1 to 10 mm
231 (1 pcs.) – Three-square scraper
234 (1 pcs.) – Scriber
237.A (1 pcs.) – Thread restoring tool
239 (1 pcs.) – Refrigeration” flaring tool (in a case)
239.EA (1 pcs.) – Inch dies
245.J2 (26 pcs.) – Set of gasket punches in a case
247.G (5 pcs.) – Sheathed nail-sets: 2 – 3 – 4 – 6 – 8 mm
249.G (5 pcs.) – Sheathed drift punches set: 2 – 3 – 4 – 6 – 8 mm
256.4 (1 pcs.) – Precision centre punch 4 mm
257.G (1 pcs.) – Sheathed automatic centre punch
263.18 (1 pcs.) – Chisel
265.20 (1 pcs.) – Constant-profile cape chisel
269 (1 pcs.) – Crowbar
285.JS10 (10 pcs.) – Set of stud extractors
31.JE6T (6 pcs.) – Roll set of low profile open-end wrenches 8 to 19 mm
311B.60 (1 pcs.) – Level with protractor dial
334B.35 (1 pcs.) – Tube cutter 3 to 35mm
374A.20 (1 pcs.) – Double-action oil can
39.JE10T (10 pcs.) – Roll set of short combination wrenches 3.2 to 11 mm
401.MT (1 pcs.) – Extra-long flat-nose precision pliers
403.MT (1 pcs.) – Precision angled half-roundnose pliers
405.12MT (1 pcs.) – Precision diagonal cutters
40LA (4 pcs.) – Long combination wrenches 33, 35, 36, 38 mm
43.JE5T (5 pcs.) – Roll set of flare-nut wrenches 7 to 19 mm
44.JE12 (12 pcs.) – Open-end wrenches 6 to 32 mm
440 (6 pcs.) – Combination wrenches 26 to 30 and 32 mm
440.JE18 (18 pcs.) – Combination wrenches 6 to 24 mm
440.JU12 (12 pcs.) – Combination wrenches 1/4″ to 15/16″
449.Z3A (1 pcs.) – Crimping plier and terminal set
495A.22EL (1 pcs.) – Heavy-duty end nippers
501 (1 pcs.) – Long-nose lock-grip pliers
507A (1 pcs.) – Compact lock-grip pliers
509 (1 pcs.) – Compact lock-grip pliers
521.200 (1 pcs.) – Sliding jaw lock-grip clamp
603F (1 pcs.) – Hacksaw frame
668B.8 (10 pcs.) – Bimetal hacksaw blades
701B (1 pcs.) – Multifunction tester
777B.230 (1 pcs.) – Inspection lamp
804 (1 pcs.) – Feeler gauge, 19 blades
809.J2 (8 pcs.) – Measuring and scribing instrument kit
827B (1 pcs.) – Magnetic retriever
82H.JP9A (9 pcs.) – Sleeve set of hexagonal keys: 1.5 to 10 mm
82H.JU10 (10 pcs.) – Roll of offset hexagonal keys 1/16″ to 3/8″
830A.10 (1 pcs.) – Ratchet tool-holder
830A.10L (1 pcs.) – Long ratchet tool-holder
834.R2 (1 pcs.) – Articulated mirror
83SH.JP9A (9 pcs.) – Sleeve set of spherical head hex keys 1.5 to 10 mm
840.1 (1 pcs.) – Electricians knife with wire stripper
841 (1 pcs.) – Electricians scissors
84E.J1 (5 pcs.) – Case-set of nut spinners
883B (1 pcs.) – Right-cut scroll shears
887A (1 pcs.) – Nibblers
89.JP8A (8 pcs.) – Torx® keys no. 10 to 45
893.316 (1 pcs.) – Locking tape measure 3 m
94A.JE13T (13 pcs.) – Roll set of nut spinners 3.2 to 14 mm
980C (1 pcs.) – Serrated shears
985761 (1 pcs.) – Automatic wire cutter-stripper
990.B1 (1 pcs.) – Bolt cropper
996.5 (1 pcs.) – Steel cable cutters
A.VE (3 pcs.) – 1,000 V insulated screwdrivers slotted head 3.5×100 – 4×100 – 6.5×150 mm
AEF.J1 (5 pcs.) – Case set of Micro-Tech® screwdrivers
AF (1 pcs.) – Screw starter for slotted heads
AN (5 pcs.) – Screwdrivers for slotted heads: 3.5×75 – 4×100 – 5.5×100 mm and short: 4×35 – 6.5×35 mm
AND (3 pcs.) – Screwdrivers for Pozidriv® PZ heads no. 0-1-2
ANF (2 pcs.) – Screwdrivers for slotted heads 6.5×150 – 8×200 mm
ANP (5 pcs.) – Screwdrivers with Phillips® PH 0-1-2 head and short: 1×35 – 2×35 mm
AP.VE (2 pcs.) – 1,000 V insulated screwdrivers Phillips® PH 1×100 – 2×125
AP6X80 (1 pcs.) – Square punch
AS.12LTP180T2 (12 pcs.) – Wallet set of needle files, 180 mm
AV.HT1B (1 pcs.) – Voltsage tester screwdriver 90 to 480 Volts
AWDH3X150 (1 pcs.) – Hexagonal blade screwdriver for Pozidriv® PZ 3 with hexagon shoulder
AWH10X175 (1 pcs.) – Hexagonal blade screwdriver for slotted heads with hexagon shoulder
AWPH3X150 (1 pcs.) – Hexagonal blade screwdriver for Pozidriv® PZ 3 with hexagon shoulder
CKS.2230-160 (1 pcs.) – Set of hooks
DELA.1051.05 (1 pcs.) – Rule 300 mm
K.432E (16 pcs.) – 3/4″ “truck” sockets and accessories: 30 to 55 mm (in a case)
NS.265M (21 pcs.) – Impact screwdriver set with bits
NS.500A (26 pcs.) – 1/2″ impact sockets and accessories: 8 to 27 mm
R.40U (11 pcs.) – Rack socket-set 3/16″ to 9/16″
RL.NANO1 (38 pcs.) – 1/4″ sockets: 5.5 to 14 mm and accessories (in a case)
S.141A (1 pcs.) – 1/2″ long drive hinged handle
S.306A200 (1 pcs.) – Torque wrench 40 to 200 Nm
S.40U (7 pcs.) – Rack socket-set 3/8″ to 21/32″
S.41U (6 pcs.) – Rack socket-set 11/16″ to 1″
S.440AP (29 pcs.) – 1/2″ Sockets and accessories: 8 to 32 mm (in a case)
STG (5 pcs.) – Files
T5.L65 (1 pcs.) – Trigger-release lock-grip pliers (with aluminium griping)
U.302 (1 pcs.) – 3-leg puller 6 to 80 mm
U.306A140 (1 pcs.) – 3-leg puller Ø 7 to 140 mm
U.306G2 (3 pcs.) – Legs for inside application
U.306M (1 pcs.) – Slide hammer
Y.RIV1 (1 pcs.) – Riveting kit